FG Teflon exhaust hose FG6402/01

Provides a perfect connection between bend and exhaust. In combination with the self-adjusting clamps FG6403 a solid connection. 

Technical data:

• Material: Heat-resistant Teflon
• Inside diameter: Ø20.8 mm
• Outside diameter: Ø24 mm
• Length: L50 mm

Mounting tips

1. Make sure the exhaust and bend are free of grease
2. Slide the clamps FG64033 onto the exhaust and manifold and briefly heat the hose so that it becomes somewhat flexible.
3. Now slide the hose over the manifold and exhaust and slide the clamps into place, (use the spring band clamp pliers TPS6403/50).
4. Heat the whole thing again so that the clamps can press the hose properly.