Zenoah G320 32cc Falcon3 Tuning motor

Meanwhile, the Zenoah engines in terms of material development have become so good that we have adjusted the tuning accordingly. It is no longer possible to raise only one outlet and lower the cylinder. Consumption has also become an important factor, and more importantly, it still has the same power even after hours of use!

The power you demand is there at any speed, a on-off switch power is impossible to use. We assemble all parts with great precision and use only high quality gaskets. Only then will you get a reliable and economical engine that delivers a lot of power and is reliable. Meanwhile, the Falcon3 tuning has been copied a lot, but the knowledge and precision remain the factor that distinguishes us from the rest!

What do we do?

• Straightening crank case
• Balancing and grinding crankshaft
• Machining the flywheel
• Modify piston
• Modify cylinder
• Modify transfer ports inserts
• Using the beste gaskets

Technical data:

• Displacement: 31.8 cc
• Cylinder bore: 38 mm
• Cylinder stroke: 28 mm
• Power: 4.44 HP at 13,000 rpm
• Pulling force: 2.74 NM at 9,000 rpm
• Idle speed: approx. 4200 rpm
• Max. speed: approx. 21,000 rpm
• Fuel consumption: approx. 533 g/kw
• Carburettor: WT1107
• Spark plug: NGK CMR7H
• Spark plug gap: 0.65mm
• Ignition system: Transistor ignition (TCI with BTC 30°/8000 rpm)
• Starting system: Pull starter
• Effective compression ratio: 9.5
• Recommended fuel: 1:25, 40 cc oil to 1 litre 98 octane fuel
• Overall dimensions (L167 x W216 x H197 mm)
• Weight approx.: 2.3 kg

This all combined gives the extra buzz what others do not have. We give you the guarantee that this engine will not disappoint you. You'll be amazed by the smooth performance which is always there, this all combined with economic fuel consumption.

We recommend for optimal use; PSR-2 Race Oil and TPS™ Air Filter Systems. This motor is suitable for all models using a BWS, Dynamic, LOSI, Zenoah, HPI Fuelie or CY engine.

Engine is delivered complete without clutch, engine flange and exhaust.

Installation in BWS, LOSI and TLR models:

If you want to install Zenoah motors in the mentioned models, you can replace the large engine cover with TPS7004 so that the mounting holes on the chassis match.

However, there is also the possibility of assembling the Zenoah in its entirety, this i.c.m. another engine mounting plate. This is rotated 180 degrees on the carburetor side mounted.

You need the following gears:

• 18 gear: LOSB5802
• 19 gear: LOSB5804
• 20 teeth gear: LOSB5805