WALBRO WT-997 Ball- Beared

Jetzt mit der Edelstahl-Vergaserwelle 340 mit Tuninghebel erhältlich.ZN0078/02

This Walbro WT-997 carburetor can be fitted on any type of motor. The WT997 is certainly one of the most popular carburetors from the big Walbro program because it’s unproblematic to adjust. For this reason it is especially recommended for the less experienced rc-car driver.

The gas valve is on both sides provided with a ball bearing with rubber seals, so that there is absolutely no wear and leakage can occur, and therefore no dirt can get into the motor. In addition, the negative pressure-upper pressure pop-off has been checked so that the carburetor lets the fuel through at the right time.

Default settings:

• Stationary screw: 2 turns
• Lower mixing screw (L) one and a quarter turn open
• Upper mixing screw (H) one and a quarter turn open

Specifications:

• Ventury: Ø18,8 mm
• Bore: Ø15,8 mm 

Suitable for all engines in our program and similar types.