WALBRO WT-1107 WITH CHOKE

Now available with the stainless steel 340 steel carburetor shaft with tuning lever.ZN0078/02

This carburetor is supplied as standard on the Zenoah G320, 32 cc engine.

The Throttle is equipped with a ball bearing with rubber seals on both sides, so that there is absolutely no wear on the housing. The standard brass axle can still wear out, so you can choose a tuning steel axle in the menu. In the latter case, wear will never occur again. The underpressure-overpressure pop-off is also checked so that the carburetor lets the fuel through at the right time.

Default settings:

• Stationary screw: 2 turns
• Lower mixing screw (L) one and a quarter turn open
• Upper mixing screw (H) one and a quarter turn open

Specifications:

• Ventury: Ø18,8 mm
• Bore: Ø15,8 mm 

Suitable for all engines in our program and similar types.