LOSI 5IVE-T 1.0, 2.0 and 3.0 shock absorbers - technology, setup, maintenance and tuning

LOSI 5IVE-T Shock Absorbers – Technology, Setup and Maintenance

The shock absorbers on the LOSI 5IVE-T 1.0, 2.0 and 3.0 play an important role in the handling, traction, stability and control of these powerful 4WD RC trucks. Correctly adjusting shock oil, springs, spring preload and damping characteristics makes a significant difference on the racetrack.

There are important technical differences between the various model generations. The LOSI 5IVE-T 1.0 and 2.0 use original 28 mm shock absorbers, while the heavier LOSI 5IVE-T 3.0 is equipped with 32 mm shock absorbers. As a result, not all components and springs are interchangeable.

On this technical information page, we explain how shock absorbers work, the differences between the models and how to adjust, maintain and improve your suspension setup.

Shock Absorber Technology Based on Racing Experience

At TPS Racing, we combine years of experience with large-scale RC racing models and practical knowledge of shock absorbers, springs, silicone oil and tuning components. This allows us to help you choose the right parts and find a suitable setup for your LOSI 5IVE-T.

LOSI 5IVE-T Shock Absorber Parts

Complete Shock Absorbers

Complete shock absorbers and available versions for the LOSI 5IVE-T. Always check that the parts are compatible with your specific model generation before ordering.

Shock Absorber Parts

Parts for repairs and rebuilding, including seals, shock bodies, pistons and other available components.

TPS Racing Tuning Parts

Discover TPS Racing tuning parts for the original 28 mm shock absorbers used on the LOSI 5IVE-T 1.0 and 2.0. Ideal for maintenance, rebuilding and technical improvements.

Shock Springs

Different spring options for 28 mm and 32 mm shock absorbers. Pay close attention to the diameter, spring length and compatibility with your LOSI model.

Silicone Shock Oil

The viscosity of shock oil influences the speed at which the shock absorber compresses and extends. Choose the oil based on the shock design, temperature and track conditions.

VIEW SHOCK OIL

Main Technical Differences

28 mmOriginal shock diameter
LOSI 5IVE-T 1.0 and 2.0
32 mmOriginal shock diameter
LOSI 5IVE-T 3.0
± 27 kgApproximate vehicle weight
LOSI 5IVE-T 1.0 and 2.0
32+ kgApproximate vehicle weight
LOSI 5IVE-T 3.0

LOSI 5IVE-T Technical Guide

Open the chapters below for detailed information about the different shock absorbers, springs, silicone oil, suspension setup, maintenance and tuning.

1. Differences Between LOSI 5IVE-T 1.0, 2.0 and 3.0

The different generations of the LOSI 5IVE-T do not all use the same shock absorbers. The shock diameter, corresponding springs and vehicle weight are particularly important when selecting the correct parts.

SpecificationLOSI 5IVE-T 1.0LOSI 5IVE-T 2.0LOSI 5IVE-T 3.0
WeightApprox. 27 kgApprox. 27 kgOver 32 kg
Original shock diameter28 mm28 mm32 mm
Original front shock oil30 WT40 WT40 WT
Original rear shock oil30 WT40 WT40 WT
Spring type28 mm version28 mm version32 mm version
Spring availabilityTPS replacement optionsTPS replacement optionsVarious original versions

Important: Springs designed for the original 28 mm shock absorbers are not directly interchangeable with springs for the 32 mm shock absorbers.

Due to the increased weight of the 3.0, different demands are placed on the suspension. A suitable combination of spring rate, damping and ride height is therefore essential.

2. How Does a LOSI 5IVE-T Shock Absorber Work?

A shock absorber consists of a body filled with silicone oil, a piston attached to the shock shaft, seals and a spring surrounding the shock body.

The Function of the Spring

The spring supports the vehicle's weight and, together with the suspension geometry, determines how far the suspension compresses under load and how much force is required for further compression.

The Function of Shock Oil

When the shock absorber moves, silicone oil flows through openings in the piston. The resistance to this oil flow creates damping.

The final damping characteristics are influenced by several factors:

  • The viscosity of the silicone oil.
  • The diameter and number of piston holes.
  • The speed at which the piston moves.
  • The shock absorber design and internal friction.
  • The temperature during operation.

Compression and Rebound

Compression refers to the shock absorber compressing. Rebound describes the extension of the shock and, in relation to internal shock setup, the tendency of the shock shaft to extend again after being compressed.

A good setup helps the tyres maintain as much contact with the ground as possible without excessive bouncing or bottoming out.

3. Shock Oil: 30 WT, 40 WT and Setup

Silicone shock oil is available in different viscosities. Higher viscosity generally produces greater damping resistance when used with the same piston configuration.

Original Starting Values

ModelFrontRear
LOSI 5IVE-T 1.030 WT30 WT
LOSI 5IVE-T 2.040 WT40 WT
LOSI 5IVE-T 3.040 WT40 WT

These values are a starting point. The best setup depends on driving style, track surface, tyres, springs, temperature and piston configuration.

Thinner Shock Oil

  • Allows the shock absorber to move more easily.
  • Can help on rough tracks with many small bumps.
  • May cause excessive bouncing or oscillation if damping is insufficient.

Thicker Shock Oil

  • Increases resistance to rapid shock movements.
  • Can provide greater control during hard landings.
  • May reduce grip on rough surfaces if the viscosity is too high.

Note: WT ratings are not always directly comparable between different oil manufacturers. When comparing brands, it is advisable to check the specified viscosity in cSt.

When testing, try to change only one setting at a time. This makes it easier to evaluate the effect of each adjustment.

4. Springs for the Original 28 mm Shock Absorbers

The LOSI 5IVE-T 1.0 and 2.0 are originally equipped with 28 mm shock absorbers. The corresponding original LOSI shock springs are no longer available.

TPS Racing therefore offers two replacement spring options for the original 28 mm shock absorbers.

What Should You Check?

  • The spring must fit the original 28 mm shock absorber.
  • The spring length must be suitable for the application.
  • The spring rate must match the vehicle weight and driving style.
  • Check that the spring can move freely around the shock body.
  • Make sure the spring sits correctly in the spring retainers.

A stiffer spring may be required if the vehicle sits too low or uses too much suspension travel under heavy loads. However, a spring that is too stiff may reduce grip on a rough track.

Important: Do not install 32 mm shock springs on the original 28 mm shock absorbers without thoroughly checking their mechanical compatibility.

5. Springs for the LOSI 5IVE-T 3.0 with 32 mm Shock Absorbers

The LOSI 5IVE-T 3.0 uses larger 32 mm shock absorbers. Various original spring options are available for the front and rear suspension.

Front Springs – 115 mm

ColourWire DiameterSpring LengthPart Number
White3.2 mm115 mmLOS-3748
Red3.3 mm115 mmLOS-3736
Blue3.4 mm115 mmLOS-3731
Orange3.5 mm115 mmLOS-3749

Rear Springs – 130 mm

ColourWire DiameterSpring LengthPart Number
White3.1 mm130 mmLOS-3745
Blue3.2 mm130 mmLOS-3737
Red3.3 mm130 mmLOS-3746
Orange3.4 mm130 mmLOS-3735

Front and rear springs differ in length and specification. Always use the correct springs for their intended mounting position.

Technical Note: Wire diameter alone does not determine the overall spring rate. Spring diameter, the number of active coils and the material also play an important role.

For example, view the original blue 32 mm front springs: LOS-3731 LOSI 5IVE-T Shock Springs.

6. TPS Racing Tuning Parts for 28 mm Shock Absorbers

TPS Racing offers various tuning and rebuild components for the original 28 mm shock absorbers used on the LOSI 5IVE-T 1.0 and 2.0.

These parts are designed to maintain, rebuild or technically modify existing shock absorbers.

Possible Improvements

  • Maintenance and replacement of seals.
  • Improved sealing when components become worn.
  • Rebuilding components around the shock shaft.
  • Modification of internal shock components.
  • Inspection and adjustment of volume compensation.

The parts required depend on the shock absorber version and its current technical condition.

VIEW TPS RACING 28 MM TUNING

Advice: Always check the exact shock absorber version and the compatibility of the selected tuning component before ordering.

7. Adjusting Shock Absorbers for Different Track Conditions

The ideal suspension setup combines spring rate, oil viscosity, ride height, spring preload and shock absorber design.

Smooth Track with High Grip

On a relatively smooth track, you can aim for a direct and stable suspension response. A setup that is too soft may cause excessive body roll or bouncing.

Rough Track

On a rough track, the suspension must react quickly enough to keep the tyres in contact with the ground. A setup that is too stiff may reduce traction.

Large Jumps and Hard Landings

When tackling large jumps, sufficient suspension support is essential. Check that the springs and damping work together to prevent the vehicle from repeatedly bottoming out.

Practical Setup Guide

Vehicle BehaviourPossible CauseWhat to Check?
Vehicle bounces over small bumpsExcessive damping or springs that are too stiffShock oil, springs and internal friction
Vehicle continues bouncing after a bumpInsufficient dampingOil viscosity and piston configuration
Vehicle frequently bottoms outInsufficient suspension supportSprings, damping and ride height
Vehicle has excessive body rollInsufficient roll resistanceSprings, anti-roll bars and ride height
Different handling on the left and right sidesUneven shock absorber performanceOil filling, trapped air, friction and springs

Racing Tip: After every setup change, complete several comparable laps. Avoid changing springs, oil and ride height simultaneously, as this makes it difficult to determine which adjustment caused the difference.

8. Filling, Bleeding and Adjusting Shock Rebound

Correctly filling and bleeding shock absorbers is essential for consistent and predictable damping performance.

General Procedure

  1. Remove the shock absorber from the vehicle and clean its exterior.
  2. Inspect the shock shaft for damage and check the seals for leaks.
  3. Open the shock absorber according to the design of the specific model.
  4. Remove old or contaminated silicone oil.
  5. Fill the shock absorber with the selected oil using the correct filling procedure.
  6. Slowly move the piston to release trapped air.
  7. Allow air bubbles to rise before closing the shock absorber.
  8. Close the shock absorber according to the specified procedure for its volume compensation design.
  9. Check that the shock shaft moves smoothly without mechanical binding.
  10. Compare the operation of the left and right shock absorbers.

What Is Rebound?

Rebound during shock filling describes how far the shock shaft extends automatically after being compressed. This depends on the internal volume compensation system and filling method.

Excessive internal pressure can cause unwanted resistance near the end of the shock stroke. Incorrect filling may also result in inconsistent damping performance.

Important: Not every shock absorber is filled in the same way. When using different pistons, diaphragms or tuning components, always follow the instructions for the specific shock design.

9. Maintenance and Rebuilding of LOSI Shock Absorbers

Due to the high weight of the LOSI 5IVE-T and the demanding conditions of off-road driving, the shock absorbers are subjected to considerable stress. Regular maintenance helps prevent small problems from developing into more serious damage.

Inspection After Driving

  • Remove sand, dust and mud.
  • Inspect the shock shafts for damage.
  • Check for visible oil leaks.
  • Make sure the springs are correctly installed.
  • Inspect mounting points and screws.
  • Compare the operation of the left and right shock absorbers.

When Should Shock Oil Be Replaced?

Replace the oil when it becomes contaminated, when damping performance changes noticeably or when carrying out a complete shock rebuild. Maintenance intervals depend heavily on usage and driving conditions.

When Should Seals Be Replaced?

Seals should be inspected when a shock absorber leaks oil or when the shock shaft no longer moves smoothly. Also check whether a damaged shock shaft has affected the seal.

Inspecting the Shock Shaft

A bent or damaged shock shaft can cause additional friction, leaks and inconsistent damping. Replace damaged components before rebuilding the shock absorber.

10. Common Mistakes When Adjusting Shock Absorbers

1. Using Incorrect Springs

The 28 mm and 32 mm versions are not automatically interchangeable. Always check compatibility.

2. Changing Too Many Settings at Once

If you change oil, springs and ride height simultaneously, it becomes difficult to identify which adjustment caused an improvement or deterioration.

3. Leaving Air Inside the Shock Absorber

Unwanted air bubbles can make damping performance less consistent. Always ensure proper bleeding.

4. Choosing Shock Oil Without Considering the Piston

The same shock oil can produce different damping characteristics when used with different piston configurations.

5. Using Excessive Spring Preload

Spring preload primarily changes static ride height and the suspension's operating position. It does not automatically increase the spring rate itself.

6. Continuing to Use Worn Components

Wear on shock shafts, seals and guides can make achieving a good suspension setup impossible.

7. Focusing Only on the Front Suspension

The front and rear suspension systems work together. Changing one end of the vehicle also affects the overall handling balance.

TPS Racing Advice: Start with shock absorbers that are in good mechanical condition, correctly filled with oil and equipped with suitable springs. Then fine-tune the setup step by step.

The Right Shock Absorber Setup Makes the Difference

A properly adjusted LOSI 5IVE-T provides greater stability, maintains better contact with the ground and responds more predictably to bumps, corners and jumps.

Keep in mind the important differences between the original 28 mm shock absorbers on the 1.0 and 2.0 and the 32 mm shock absorbers on the 3.0. Choose parts that match the correct version and develop your suspension setup systematically.

With the right combination of springs, silicone oil, maintenance and tuning, you can get more performance from your LOSI 5IVE-T suspension.