Zenoah Air filter foam flat ZN0101

Attention! This filter foam is NOT suitable for Off-Road!

Matching air filters:

• ZN0098 Airfilter flat with choke
• FG7356/08 Airfilter flat without choke

Suitable Products:

• Air filter cleaner TPS0490/06 and GHI-AFC1000
• Air filter oil TPS0490/05, GHI-AFO150 and PUT70007 

Cleaning the filter;

• First brush heavily soiled filters with a soft brush,
• Take a container that is at least 2 times the size of the filter and fill it with lukewarm water,
• Add 3-5 tablespoons, (depending on the dirt), cleaner TPS0490/06,
• Let the filter soak for 20 to 30 minutes and then rinse with warm water,
• Repeat until the water is completely clear, and let the filter dry thoroughly. '

Treat for On-Road;

• Spray the outside of the filter with special foam air filter oil GHI-AFO150, or PUT70007
• This from left to right and top down until the entire filter has a uniform color,
• Put the filter in a dry and clean plastic bag, and carefully knead the filter thoroughly,
• Allow the filter to dry for at least one hour in a well-ventilated room or open air,
• The filter is now ready for use.
• TIP! More dirt also means adding more oil.

** NEVER USE AGGRESSIVE AGENTS SUCH AS BRAKE CLEANER O.I.D. OR COMPRESSED **