Paint instructions for Normal Color;

The cover capacity of the RC Car Colours is different, darker colors cover better than the lighter ones, so always work from dark to light!

Paint instructions:

• Prior to use, shake the can well for 2 to 5 minutes until you hear the steel mix ball mix evenly and bright rattle.
• Surface has to be clear of dust and grease to get the best result
• Make sure that the spray can has a temperature of about 20-25 degrees Celsius, and the setting temperature is at least 15 degrees Celsius!
• Spray with cross movements up and down for 2 to 4 thin layers at a distance of 20 to30 centimetersfor the best results and optimal adhesion.
• Wait at least 5 minutes between the application of the different layers!
• Let one color dry for at least 30 minutes before spraying the others, and finally cover all with RC Car Colours White for optimum brightness.
• After use, keep the can upside down and spray for 2 seconds until the nozzle is clean.

Important Notes!

• Always work in a well ventilated area
• Pressurized container.
• Protect from sunlight and do not expose to temperatures exceeding 50 ° C.
• Even after use, do not pierce or burn.
• Keep away from sources of ignition and open flames - no smoking.
• Do not spray into a naked flame or any incandescent material.
• Keep out of reach of children.

NOTE! Spray cans can not be shipped outside the EU

NOTE! PRESSURED CANS CAN NOT BE SHIPPED OUTSIDE THE EU