HTRC T240-DUO Charger.

Double 10 Ampère charger with 3.2 "Full Color Touch screen for a very competitive price.

T240 is a new design dual balance charger by HTRC, which can charge two different kinds of batteries simultaneously, 3.2 inch color LCD Touch screen display, easy operation, built-in cooling fan Designed for charging LiPo, LiFe Lilon, LiHV, NiCd, NiMh, Pb and Smart Batteries.

It can support power distribution in 220 volt AC mode an 12-18 Volt DC mode. Max charge current can reach 10A each port in both AC and DC mode.

Your benefits:

• Very simple menu operation with Touchscreen
• Fully automatic charging process
• Integrated power supply (suitable for 12 ~ 240 volts)
• 2 x 6S LiPo/LiFe/LiLo/LiHV
• 2 x 15S NiMH
• Buil int Cooling Fan
• Double charger, easy operation. 
• AC/DC dual input model. 
• Twin-channel 2 in 1 charger,charge two different kinds of batteries simultaneously. 
• High-power and high-performance circuit.
• Distributable circuit power in AC model: CH1+CH2=150W. 
• In DC model each port circuit power can reach 120W. 
• Built-in cooling fan, comes with power switch.support firmware upgrade.
• Multi-chemistry battery charging and discharging:
• 1-6s LiPo LiFe LiHV Lilon,1-15s NiCd/NiMH, 2-20V PB and smart battery.
• Automatic identification of lithium batteries cells counts.
• Multi-charging models: charge discharge, and more model such as: balance charge, storage model of Lithium, Cycle model of NiMH/NiCd.
• Trickle model of PB.
• Battery monitor, balancer and resistance check: this charger can display battery status by color graphic.you can easily see lithium battery cell counts, battery capacity percentage,each cell's voltage,total voltage.can check each cells' internal resistance of Lithium battery.
• Calibration and Terminal voltage control. 
• Support 6s battery cell voltage calibration. It also allows user to set the charge/discharge end voltage of the battery. For an example:lipo battery end voltage is 4.2V /cell when charging, while on this charger, the end voltage is adjustable, rangs from 3.85v to 4.3v. warning: TVC function for expert only!
• Max safety: Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit,temperature threshold. Data storage and loading: 6 memory data each channel.
• Small and handy
• Very competitively priced

Very simple charger for those who want no complicated menu controls. Full automatic control, always fully charged batteries without any fuss. Simply follow the steps shown on the large display with Touchsreen. 

Technical Details:

• Model No.:HT-0099
• Input: AC 100-240V/DC 11-18V
• Charge power: AC mode 150W, DC mode 120W*2 =240W
• Discharge power: Max 2 x 10W
• Charge current range: 2 x 0.1-10A
• Discharge current range: 2 x 0.1-2A
• Lilon/LiPo/LiFe/LiHV cell count:2 x 1-6cells
• NiCd/NiMH battery cell count:1-15cells*2
• PB Battery voltage:2-20V*2
• Smart battery:I/II/III*2
• Current drain for balancing:500mA/cell

Package list:

• 1 x T240 charger
• 2 x Charge cable banana plug to T-Plug
• 2 x Extension charge cable T-Plug to XT60
• 2 x balance board with pin cord
• 1 x AC Cord (US EU UK AU optional)
• 1 x DC Cord
• 1 x User's Manual

Dimensions:

• Width: 130 mm
• Length; 122 mm
• Height: 53 mm
• Netto Weight: 300 grams

HTRC DUO240 Charger