Personal and Expert advice
Superfast Shipping
Shipper worldwide
TLR256012 TLR Filter insert L110-W110 mm, Set
TLR256012 TLR Filter insert L110-W110 mm, SetTLR256012 TLR Filter insert L110-W110 mm, Set

TLR256012 TLR Filter insert L110-W110 mm, Set

In stock
Order now and it will be sent today 22 November 2024
TLR Racing
Product code TLR256012
EANcode: 8719697060182

€22.90 €21.90

Original spare air filter Set for the TLR 5IVE-B Buggy.

Used in very dusty conditions.

Fits filter:  

  • TLR256004 

As with all foam filters, it is important to treat it properly. We have developed special products that meet the requirements for an effective filter. We give all our filters guarantee, provided they are treated with our TPS products such as:

  • Air filter cleaner TPS0490/06
  • Air filter oil TPS0490/05 and PUT9894
  • Antistatic filter cover, TPS0490/14 and TPS0490/20, 

Cleaning the filter;

  • Heavily soiled filters brush off the excessive dirt with a soft brush,
  • Take a container that is at least two times the size of the filter and fill it with warm water,
  • Add 3-5 tablespoons (depending on the pollution), cleaner TPS0490/06,
  • Put the filter completely in the container, 
  • Let the filter soak for 20-30 minutes and then rinse it out with warm water,
  • Repeat this procedure until the water is completely clear, and let the filter dry thoroughly.

Oiling for On-Road use; 

  • Spray the inner filter in with special foam air filter oil PUT9894,
  • From left to right and top to bottom until the whole filter has a uniform color,
  • Gently massage the oil in the filter using a plastic bag, then let in the filter dry for at least an hour in open air,
  • The amount of oil that should be applied depends entirely on the circumstances, more dirt also means more oil,
  • Ready for use. 

Oiling for Off-Road use; 

  • Take a container where the filter fits in, and fill it with half the contents of filter oil TPS0490/05
  • Now press the inner foam part in the oil, and let it soak for a few seconds, 
  • Take the filter out and gently press out all excessive oil out immediately,
  • Put the remainder oil back into the bottle and store it in a cool dark place,
  • Gently massage the oil in the filter using a plastic bag, then let in the filter dry for at least an hour in open air,
  • Take a paper towel and press out all excessive oil,
  • Ready for use 

** NEVER USE AGRESSIVE AGENTS LIKE BRAKE CLEANER OR PRESSED AIR **

Write Your Own Review
You're reviewing:TLR256012 TLR Filter insert L110-W110 mm, Set
Your Rating

More interesting products for you?