Aluminum dividable differential mounts center

The plastic differential holders of the BWS DTT7 and LOSI 5T models cannot withstand strong tuning engines and high temperatures.

The total drive from the engine must be distributed via the center differential to the 4 wheels, this means that the temperature can rise considerably. The plastic holders cannot handle this very well. In addition, plastic is deformed and excessive wear occurs on the drive gears.

This aluminum divisible mount set consists of 4 parts, whereby the two lower parts are screwed onto the chassis and which can remain in place during work on the differential. The supplied dowel pins can be secured in the two lower parts with Fixing adhesive TPS648.

The top two can be removed and assembled in one go, together with the brakes, using the supplied Allen screws. This makes working on the middle differential very simple.

Set come complete with brake lining screws.

Suitable for:

• BWS DTT7 models
• LOSI 5T models (Not suitable for the 2.0)
• Rovan LT models

The differential and cover shown in the photo are not included in the delivery!