VRC Big-Bore Tuning pipe Unsilenced LOSI-BWS-Rovan VRC8709

This VRC exhaust fits the lower mentioned models with engines from 28 to 34 cc.

VRC, Victory RC, exhausts guarantee a considerable power gain in the whole RPM. In general, the power of a standard engine is increased by more than one horsepower, and the low end torque by more than 1 Newton meter.

Each pipe is made from thin sheet metal and hand welded and assembled. This VRC exhaust has no internal noise reducer and therefore produces the real Race sound. The pipe contaons several chambers for maximum performance.

Mounting tip; Slide the rubber hose over the pipe and mount the manifold and spring. Then mount the assembly hand-tight on the cylinder. If you know for sure that it is in the right place on the car, fix the pipe and mount the cable ties. We recomend to use the TPS6403/32 clambs.

It often seems that the exhaust does not fit, but this is not the case. In the beginning there was a tight fit between the pipe and manifold, but due vibrations the cylinder that was fixed with 2 bolts, and/or the exhaust started to tear. Since a few years, that fit has been made wider to prevent this. But this does mean that the exhaust can move more, this also benefits the assembly on the car. Due to the strong spring the exhaust pulls in one direction, so it seems that the exhaust does not fit.

Suitable for:

• LOSI 5T Models
• BWS Racing DTT7 Models
• LOSI MINI WRC
• Rovan LT Models

NB! VRC exhausts cannot be returned and/or exchanged due the possible rust building after handling/unpacking!