VRC Tuning pipe TLR 5B Unsilenced

This VRC exhaust fits the lower mentioned models with engines from 23 to 29 cc.

VRC, Victory RC, exhausts guarantee a considerable power gain in the whole RPM. In general, the power of a standard engine is increased by more than one horsepower, and the low end torque by more than 1 Newton meter.

Each pipe is made from thin sheet metal and welded and assembled entirely by hand. This VRC exhaust has no internal noise reducer and consists of several chambers for maximum performance. For the real "Sound" enthousiatst!

Mounting tip; Slide the rubber hose over the pipe and mount the manifold and spring. Then mount the assembly hand-tight on the cylinder. If you know for sure that it is in the right place on the car, fix the pipe and mount the cable ties. We recomend to use the TPS6403/32 clambs.

It often seems that the exhaust does not fit, but this is not the case. In the beginning there was a tight fit between the pipe and manifold, but due vibrations the cylinder that was fixed with 2 bolts, and/or the exhaust started to tear. Since a few years, that fit has been made wider to prevent this. But this does mean that the exhaust can move more, this also benefits the assembly on the car. Due to the strong spring the exhaust pulls in one direction, so it seems that the exhaust does not fit.

NB! VRC exhausts cannot be returned and/or exchanged due the possible rust building after handling/unpacking!