FG14000 Sports-Line 2WD-WB465 mm

Your benefits:

• ARTR almost ready to ride
• Cable disc brakes on the front wheels
• Central rear brake
• 23 cc Zenoah engine
• tuning exhaust
• Adjustable shocks

This model with a short wheelbase, (WB465 mm), is suitable for a.o. Porsche GT2 body, and is delivered completely built on a 4 mm aluminum chassis with double wishbones on the rear and front axle. All holes in the aluminum chassis for attaching the chassis parts are countersunk from below. These models are equipped with a central disc brake and disc brakes on the front wheels for optimal braking performance. Ride height, toe-in, out-of-trail and camber can be infinitely adjusted on both the front and rear axle by means of rods or adjusting screws with right/left threads.

Further equipment is:

Planetary rear differentials, hardened drive shafts, aluminum caliper with large disc brake, disc brakes on the front wheels, oil pressure damper with volume compensation and external spring preload adjustment ring. All rotating drive parts such as shafts, shafts, clutch housings, etc. are ball bearing mounted. The hoods to be chosen are available in transparent Lexan, (the transparent version can be sprayed from the inside with Lexan paint, the blue sprayed variant can also be supplied with stickers. With the chosen body you will receive all supports and attachment points that you need to put the body on the car The tires are glued to the rims.

These models are powered by a strong 23cc 2-stroke Zenoah engine with a special racing exhaust; A 2-stroke petrol-oil mixture of 1:25, (so 40 cc of oil to 1 liter of super petrol), is required. Thanks to the built-in pull starter, the engine can be started without any problems or further equipment. The driving time of a full tank of 700 cc is approximately 40 to 45 minutes.

This Almost Ready To Run model still requires the necessary electronics such as a, (at least), 3-channel transmitter with receiver, throttle/brake servo, steering servo and batteries for the transmitter and car, as well as a suitable charger. The Ready To Run version is compleet with alle nessesary electronics.

Technical data:

• Wheelbase 465 mm
• 4mm thick aluminum chassis
• Double wishbones front and rear
• Oil filled shock absorbers with adjustable spring pressure
• Cable disc brakes at the front
• Rear central brake
• Complete ball bearings
• Hardened drive parts
• Racing exhaust
• 23 cc 2-stroke Zenoah engine with pull starter

Sizes and weight:

• Length: 840mm
• Width: 405mm
• Height: 260mm
• Wheelbase: 465mm
• Weight: 13 kilos

What else do you need:

• Transmitter with receiver
• Throttle/brake and steering servo
• Batteries
• Battery charger with charging cables
• Jerrycan
• 2-stroke mixing oil, (1:25)
• Super gasoline