FG Modellsport Sports-Line 2WD-WB465 mm RTR FG14000R

Your benefits:

• RTR ready to run
• Cable disc brakes on the front wheels
• Central rear brake
• 23 cc engine
• Tuning exhaust
• Adjustable shocks

This model with a short wheelbase, (WB465 mm), is suitable for a.o. Porsche GT2 body, and is delivered completely built on a 4 mm aluminum chassis with double wishbones on the rear and front axle. All holes in the aluminum chassis for attaching the chassis parts are countersunk from below. These models are equipped with a central disc brake and disc brakes on the front wheels for optimal braking performance. Ride height, toe-in, out-of-trail and camber can be infinitely adjusted on both the front and rear axle by means of rods or adjusting screws with right/left threads.

Further equipment is:

Planetary rear differentials, hardened drive shafts, aluminum caliper with large disc brake, disc brakes on the front wheels, oil pressure damper with volume compensation and external spring preload adjustment ring. All rotating drive parts such as shafts, shafts, clutch housings, etc. are ball bearing mounted. The hoods to be chosen are available in transparent Lexan, (the transparent version can be painted from the inside with Lexan paint, the blue painted variant is ready with decals. With the chosen body you will receive all supports and attachment points that you need to put the body on the car The tires are glued to the rims.

These models are powered by a strong 23cc 2-stroke engine with a special racing exhaust; A 2-stroke petrol-oil mixture of 1:25, (so 40 cc of oil to 1 liter of super petrol), is required. Thanks to the built-in pull starter, the engine can be started without any problems or further equipment. The driving time of a full tank of 700 cc is approximately 40 to 45 minutes.

This Ready To Run model has all the necessary electronics mounted and adjusted like: 3-channel 2.4 gig transmitter with receiver, throttle/brake servo, steering servo and batteries for the transmitter and car, as well as a suitable charger. 

Technical data:

• Wheelbase 465 mm
• 4mm thick aluminum chassis
• Double wishbones front and rear
• Oil filled shock absorbers with adjustable spring pressure
• Cable disc brakes at the front
• Rear central brake
• Complete ball bearings
• Hardened drive parts
• Racing exhaust
• 23 cc 2-stroke engine with pull starter

Sizes and weight:

• Length: 840mm
• Width front: 384 mm
• Rear width: W395 mm
• Height: 255mm
• Wheelbase: 465 mm
• Weight: 13 kilos

What else do you need:

• Jerrycan
• 2-stroke mixing oil, (1:25)
• Lexan paint
• Super gasoline