FG Modellsport Sports-Line 4WD-WB510 RTR FG154200R

Your benefits:

• Strong 26cc Chung Yang or Zenoah 2-stroke engine with simple pull starter
• Proven ball drive
• Beautifully detailed body
• Lots of grip in all conditions
• Speed ​​up to 80 km/h
• Completely built
• Virtually maintenance-free gear transmission

The models are built on a 4 mm aluminum chassis with double wishbones on the rear and front axle. All holes in the aluminum chassis for attaching the chassis parts are countersunk from below. These models are equipped with a central disc brake and disc brakes on the front wheels for optimal braking performance. Ride height, toe-in, toe-out and camber can be infinitely adjusted on the front and rear axles by means of rods or adjusting screws with right / left thread.

Further equipment is:

Planar differentials front and rear, smooth FG ball drive, aluminum brake caliper with large brake disc, oil pressure shock absorber with volume compensation and external spring preload adjusting ring. All rotating drive parts such as shafts, shafts, clutch housings, etc. are ball-bearing. The body to be chosen are available in transparent lexan, (spray yourself from the inside with Lexan paint), and the sprayed variant complete with decals. With the chosen body you will get all the supports and mounting points you need to put the body on the car. The tires are glued to the rims.

These models are powered by a strong 23cc 2-stroke Zenoah engine with a special racing exhaust.A 2-stroke gasoline-oil mixture of 1:25, (so 40 cc oil on 1 liter of super gasoline), is required. Thanks to the built-in recoil starter, the engine can be started without any need or further equipment. The driving time for a full tank of 700 cc is approximately 40 to 45 minutes. This RTR model is fully equipped with transmitter, receiver, transmitter battery, receiver battery, throttle and brake servo.

Technical data:

• 510 mm wheelbase
• 4 mm thick aluminum chassis
• Double wishbones at the front and rear
• Oil-filled shock absorbers with adjustable spring pressure
• Cable front disc brakes
• Central rear brake
• Complete ball bearing
• Rear ball drive
• Front and rear stabilizers
• Race exhaust
• 26cc 2-stroke engine with recoil starter

Dimensions:

• Length: 810mm
• Width: 405 mm
• Height: 260 mm
• Wheelbase: 510 mm
• Weight: 13 kg

What else do you need:

• Battery charger with charging cables
• Jerrycan
• 2-stroke mixing oil, (1:25)
• Super gasoline