Spektrum DX5C SMART with SR6100AT Telemetry receiver

In combination with Spektrum Firma Smart ESCs and Spektrum Smart receivers, there is a complete Telemetry environment that works perfectly without any delay. The Spektrum SMART ESCs also display speed, speed, ESC temperature, voltage and current.

This amazing Spektrum SMART DX5C is the perfect smart solution for cars, boats that want a dazzling list of advanced features, including Telemetry. Obviously equipped with the trusted 2019-2020 version of DSMR® 2.4GHz technology.

You can use the DX5C SMART in any form, car, boats and crawlers, the range and response are fantastic. It is also backwards compatible with DSM2® Spektrum receivers. This Spektrum DX5C Smart can be used with almost all Spektrum receivers.

Technical details:

• 5 fully proportional channels
• Spektrum Smart Technology ready
• Program and tune compatible AVC receivers
• 20 model memory
• Smooth precision with double ball bearings
• DSMR®-DSMR2®
• Non-slip rubber handles
• Back button makes navigation on the interface more intuitive
• Steering mix, 4-wheel mix, plus one assignable mix
• Bind progress screen shows status and frame rate
• Program and tune compatible AVC® receivers
• Compatible with DSMR and DSM2 * receivers (DSM2 only works with a frame rate of 16.5 ms)
• EN328 compatible
• Including SR6100AT AVC / Telemetry receiver

Content Set:

• Spektrum DX5C SMART
• Spektrum SR6100AT Telemetry Receiver
• Manual
• 4 x AA battery are not included

Settings when using Hilantronics Motor Killer:

• Install the Killer motor as indicated
• Connect the Killer to AUX3 or AUX4
• Go to Aux Assign in the menu
• Set the Input to D
• Set the Mode to 2-pos
• Set the Cyclic to Active
• Set the Momentary to Inhibit
• Now you can switch the Killer on and off with the D button.

DISABLE AVC TECHNOLOGY IN THE SR6100AT

• Turn on the receiver and quickly press and hold the bind button 3 times within 1.5 seconds.
• When the receiver's orange LED starts flashing, it is in bind mode, now release the bind button.
• When the AVC system is turned off, the LED on the receiver will flash three times when turned on and then stay lit.
• The receiver is bonded and works normally if the LED remains lit.

REMARK:

• If you only select INH (Inhibit) in the AVC menu on your transmitter, the AVC will NOT be turned off!