Lii-600 Touchscreen charger

More and more is being demanded of AA and AAA batteries, and a good charger is becoming more and more important for the proper charging of these batteries. Of course you can use a cheap plug charger in most cases, but for maintenance and capacity a good charger is a must!

This technically advanced Touchscreen charger is simple to operate and suitable for maintaining your Nicad, Nimh and Lithium-Ion AA and AAA batteries, and also particularly suitable for 21700, 18650, 26650, 18350 and 14500 Lithium-Ion cells. This Lii-600 charger can be used as a fully automatic charger, discharger and battery tester, but also offers the possibility to adjust these processes to your own taste via the color Touchscreen.

With the help of the Repair function, older cells can be revived by a fully automatic test, discharge and charging process. This Lii-600 is protected against closure, reverse polarity or broken cells, so it is completely safe to use. Equipped with a 5.0 volt USB connection for charging your mobile or tablet.

Extra cable for charging from your cigarette 12 volt connection in your car is included.

Particularities:

• Color Touchscreen operation
• Four independent battery slots
• Automatic mode per slot/cell
• Manual mode per slot/cell
• Temperature protection per slot/cell
• Sound signals per slot/cell
• Charging current Nicad/Nimh: 250 ~ 500 ~ 1000 mah per slot/cell
• Charging current Lithium-Ion: 250 ~ 500 ~ 1000 ~ 1500 ~ 2000 ~ 2500 to 3000 mah per slot/cell
• Discharge Current: 250 ~ 500 and 750 mAh per slot/cell
• Load settings per slot/cell
• Discharge settings per slot/cell
• Test settings per slot/cell
• Suitable for: Nicad, Nimh and Li-on cells

Values ​​to be read:

• Charging current per slot/cell
• Capacity in % per slot/cell
• Battery voltage per slot/cell
• Internal resistance in mΩ per slot/cell
• Temperature per slot/cell
• Duration of charge per slot/cell
• Charged current in mah per slot/cell
• Discharge current in mah per slot/cell
• Duration of discharge per slot/cell
• Discharge current in mah per slot/cell
• Repair function per slot/cell

Technical data:

• Charger input voltage: 220V or DC12V ~ 5A
• Output Voltage: DC 4.2 ~ 1.48V
• Charging current NiCd and NiMH battery: 250 ~ 500 and 1000 mah
• Charging current Lithium-Ion: 250 ~ 500 ~ 1000 ~ 1500 ~ 2000 and 3000 mah
• Discharge Current: 250mA / 500mA / 750mA
• Termination method: intelligent voltage monitoring
• Dimensions: L165 ~ W115 ~ H40 mm
• Weight: 320 gramm

Protected against:

• Overload
• Short circuit
• Temperature

Content Delivery:

• Lii-600 Color Touchscreen charger
• 220/12 volt power supply
• Cigarette 12 volt cable 
• Instructions