Hydraulic Brake Filling and Bleeding Set TPS9452/02

Complete bleeding set for hydraulic brakes.

Instructions for use:

1. Fill one syringe with the hydraulic oil of your choice,
2. Press all air out of the syringe so that it is filled with oil up to the end of the hose,
3. Now connect the other syringe to the bleeding nipple of the brake system and attach it at the highest point,
4. Now open both filling and bleeding valves on the brake system,
5. Carefully push the oil through the system until no air is visible,
6. Now release the pressure from the syringe and close both filling and bleeding valves again.

Contents:

• 2 x 20 ml Syringes with Tygon hose

Hydraulic oil:

• DOT4
• DOT5