TPS15416 Air Filter Element HPI-Rovan

Suitable for HPI, Rovan and King Motor Baja models. Contents 1 x inner ring and 1 x outer ring.

Suitable for:

• TPS15411
• HPI15411
• HPI85444

Cleaning the filter;

• First brush off heavily soiled filters with a soft brush,
• Take a container that is at least 2 x the size of the filter and fill it with lukewarm water,
• Add 3-5 tablespoons, (depending on the pollution), cleaner TPS0490/06,
• Place both filters in the tank and let it soak for 20 to 30 minutes and then rinse with warm water,
• Repeat until the water is completely clear, and let the filters dry thoroughly.

Treat for On-Road;

• Spray the inner filter part with special foam air filter oil PUT70007,
• This from left to right and top to bottom until the whole filter has an even color,
• Put the filter in a dry and clean plastic bag, and gently knead the filter well,
• Now let the filter dry for at least an hour in a well-ventilated room or open air,
• The filter is now ready for use.
• TIP! More dirt also means applying more oil.

Treat for Off-Road;

• Take a container where the inner filter fits well and fill it with half the content of filter oil TPS0490/05,
• Now press the inner filter completely into the oil,
• Immediately remove the filter from the oil and immediately press all excess oil out of the filter,
• Put the rest of the oil back in the bottle and keep it in a cool dark place,
• Now let the filter dry for at least an hour in a well-ventilated room or open air,
• Put the filter in a plastic bag and knead it well,
• The filter is now ready for use.

**NEVER USE AGGRESSIVE AGENTS SUCH AS BRAKE CLEANER O.I.D. OR COMPRESSED AIR**